Fault finder: ESP-NOW sensor network without a router

11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No messages: what should I check?

The MAC address is wrong or the gateway sketch is not running. Copy it again.

Compile error about the callback: what should I check?

Your core version differs. On 2.x the first argument is const uint8_t *mac.

DHT22 returns NaN: what should I check?

Check the pull-up and the 2 second wait after power.

Nodes miss readings: what should I check?

Move closer and keep antennas away from metal.