Fault finder: ESP-NOW remote button lamp

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Compile error about the callback: what should I check?

Use the core 2.x callback form shown in the comment.

LED never lights: what should I check?

Check the LED direction and the pin number.

Works only when close: what should I check?

Move the boards away from metal and keep the antenna end clear.

Button seems reversed: what should I check?

Check it goes to GND, not 3V3.

Upload fails: what should I check?

Hold the BOOT button while it connects.