Fault finder: Hot car cabin logger
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
SD failed: what should I check?
Check the wiring, FAT32 format and the CS pin.
SHT31 not found: what should I check?
Check SDA and SCL and the address 0x44.
Readings too high in sun: what should I check?
Shade the sensor from direct sunshine.
Battery very warm: what should I check?
Stop the test and shade it.
