Fault finder: Office CO2 ventilation advisor

7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Sensor not found: what should I check?

Check SDA and SCL and the power voltage.

Ring shows wrong colours: what should I check?

Try NEO_RGB instead of NEO_GRB.

Relay does not click: what should I check?

Check the 12 V supply and the trigger voltage.

Reading looks stuck: what should I check?

Wait for the 5 second update.