Fault finder: USB energy meter
10 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Gadget does not charge: what should I check?
The charger needs the CC resistors on the breakout, and fast charging needs D+ and D−.
Negative mA: what should I check?
VIN+ and VIN− swapped.
LCD shows blocks: what should I check?
Turn the contrast trimmer.
