Fault finder: Electronic Ludo dice
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
A segment is missing: what should I check?
Check its resistor and wire, and the display pinout.
Always the same numbers: what should I check?
Random seed is fixed. Leave A0 unconnected.
Touch pad triggers on its own: what should I check?
Keep it away from metal and use the power pins from the same Nano.
Colour looks wrong: what should I check?
Check the RGB leg order for your LED.
