Fault finder: E-paper weather photo frame
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Blank panel: what should I check?
Check SPI is enabled and the module matches your panel.
Import error: what should I check?
Copy the waveshare_epd folder next to the script.
Ghosting: what should I check?
Do a full refresh occasionally.
Timer never runs: what should I check?
Check systemctl status for the timer.
