Fault finder: E-paper conference name badge

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Garbled picture: what should I check?

Choose the right GxEPD2 class for your panel.

QR will not scan: what should I check?

Shorten the text or enlarge each square.

Button does not wake: what should I check?

Use a GPIO that supports wake-up on your board.

Resets during refresh: what should I check?

Use a LiPo, not a coin cell.