Fault finder: Dust storm alert for Rajasthan homes

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Dust always zero: what should I check?

Check the LED pulse wiring and polarity of pin 3.

Noisy: what should I check?

Check the capacitors and average more samples.

Wind reads zero: what should I check?

Check the slot sensor output and the pull-up.

False alarms: what should I check?

Raise the thresholds.