Fault finder: Custom tune doorbell

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

SD card not FAT32 or the files are not named as 0001.mp3.

Hiss or crackle: what should I check?

Use a good 5 V supply and keep the speaker leads short.

Wrong volume at night: what should I check?

RTC time is wrong. Reset it.

Always plays the same track: what should I check?

randomSeed uses an unconnected pin, which is fine. Check TRACKS matches the files.