Fault finder: Main door locked or unlocked indicator
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Always red: what should I check?
Flip the magnet or move the sensor closer.
Flickers: what should I check?
Shorten the cable or add a small capacitor at the sensor.
Both off: what should I check?
Check the LED legs and resistors.
