Fault finder: Growth chart wall
11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Readings jump: what should I check?
Use a flat card and the median setting.
Height too high or low: what should I check?
Recalibrate the floor.
No date: what should I check?
Check the Wi-Fi details.
OLED blank: what should I check?
Check the address 0x3C.
