Fault finder: Door left-ajar chime

6 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No reaction: what should I check?

Flip the magnet, only one pole works, and check the pin order.

Always reads closed: what should I check?

Check the 10 kilohm pull-up and pin 3 wire.

Chimes too early: what should I check?

Raise OPEN_LIMIT_MS.

False openings: what should I check?

The magnet is too far, move it closer.

Buzzer silent: what should I check?

Check it is an active buzzer and the polarity.