Fault finder: Diwali LED light patterns

8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

First LED wrong colour: what should I check?

Check the 330 Ω resistor and the ground.

Whole strip flickers: what should I check?

Check the shared ground and the capacitor.

Colours fade to orange at the end: what should I check?

Add power at the far end.

Nano resets: what should I check?

Power it from the same 5 V supply, not from the USB.