Fault finder: Ultrasonic distance alert

10 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always 0 or "No echo: what should I check?

Check TRIG and ECHO are not swapped and VCC is 5V.

Readings jump around: what should I check?

Soft or angled surfaces scatter sound: test against a flat wall.

Buzzer silent: what should I check?

It may be a passive buzzer: use tone(BUZZER, 2000) instead.