Fault finder: Dice on an LED matrix
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Matrix blank: what should I check?
Check DIN, CLK and CS pins and wake with shutdown(0,false).
Dots turned or mirrored: what should I check?
Reorder the rows or flip the bits.
Same rolls every time: what should I check?
Check the randomSeed lines.
Button rolls twice: what should I check?
Add a short delay after a press.
Library not found: what should I check?
Install LedControl in the Library Manager.
