Fault finder: MP3 player with DFPlayer Mini

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

DFPlayer not found: what should I check?

Swap TX and RX, check the 1 kΩ, and reseat the card.

Loud hiss or clicks: what should I check?

Power the Nano from a clean 5 V supply and keep the speaker wires short.

Plays the wrong song: what should I check?

Format the card and copy the files again in number order.

Very quiet: what should I check?

The built-in amplifier is small. Use an 8 Ω speaker of at least 0.5 W, or a PAM8403 board for more volume.