Fault finder: Device heartbeat and offline alerts
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No heartbeats: what should I check?
Check the broker address and port.
Offline never reported: what should I check?
Check the last will uses a retained message.
Duplicate names: what should I check?
Give each device a unique name.
Monitor crashes: what should I check?
Check the paho-mqtt version and the callback style.
