Fault finder: Pomodoro desk timer
11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Display blank: what should I check?
Check CLK and DIO and the library.
Countdown too fast or slow: what should I check?
Check TICK is 1000.
Button seems to double press: what should I check?
Keep the 30 ms delay after a press.
No sound: what should I check?
Check buzzer polarity and the D8 wire.
LED stays dim: what should I check?
Check the 220 ohm resistor and LED direction.
