Fault finder: Button debounce comparison

7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Counters all stay zero: what should I check?

Check the pull-up and the wiring to the pins.

Schmitt count is zero: what should I check?

Check 74HC14 power and the unused inputs.

Software count is high: what should I check?

Raise the 30 millisecond lock-out.

RC count too low: what should I check?

Capacitor too large, try 22 nanofarad.

Counts jump while idle: what should I check?

A floating input, check every wire.