Fault finder: DC motor direction and speed lab

11 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Motor does not move: what should I check?

Check the ENA jumper is removed and PWM is on D9, and the common ground.

Only one direction: what should I check?

Check IN1 and IN2 wiring.

Motor weak: what should I check?

Fresh batteries and the 2 V drop; check the supply.

Uno resets: what should I check?

Power it from USB, not the motor pack.