Fault finder: DC motor speed and direction
12 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 12 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 12
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing moves: what should I check?
STBY must be HIGH and VM must have battery voltage.
Uno resets when the motor starts: what should I check?
Motor powered from the Uno: use the battery pack for VM.
Motor hums at low speed: what should I check?
Normal below about 20 %: the motor needs a minimum push.
