Fault finder: Eight-channel voltage logger

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

SD card not found: what should I check?

Check CS on D10 and the card format.

Readings jump: what should I check?

Connect unused inputs to GND and keep wires short.

All values 5 V: what should I check?

Check pins 9, 14 and the ground wiring.