Fault finder: Dark-activated street light with one transistor
11 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LEDs always on: what should I check?
Turn the trimmer the other way, or check the LDR goes to minus, not plus.
LEDs never light: what should I check?
Check the BC547 pinout (collector, base, emitter with the flat side towards you) and the LED polarity.
LEDs fade on slowly at dusk: what should I check?
One transistor switches gradually. An LM393 comparator or a second transistor stage gives a sharp switch.
