Fault finder: Daisy-chained shift register display

9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Only the first eight LEDs work: what should I check?

Check pin 9 of the first chip goes to pin 14 of the second.

Second chip shows the wrong bits: what should I check?

Swap the order of the two shiftOut() lines.

Random LEDs light: what should I check?

Pin 10 SRCLR must be at 5V and pin 13 OE at GND on both chips.

LEDs flicker: what should I check?

Add a 100 nF capacitor between 5V and GND next to each chip.

Nothing lights: what should I check?

Check the notch direction of both chips and the LED direction.