Projects / Daily mood diary / Fault finder

Fault finder: Daily mood diary

11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Prints No RTC found: what should I check?

Check the clock module's SDA and SCL wires.

Time is wrong: what should I check?

Remove the coin cell for a moment, or re-upload to set it.

Blank screen: what should I check?

Check the OLED wires and try address 0x3D.

Buttons do nothing: what should I check?

Check each goes to its pin and GND.

Old data shows: what should I check?

Change EE_MAGIC to another value to start afresh.