Fault finder: Number comparator with gates

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No LED lights: what should I check?

Check the 5 V and ground on pins 14 and 7.

Two LEDs lit: what should I check?

Check the NOR for A < B and the equality chain.

Odd results: what should I check?

Check every unused input is tied low or high.

LED dim: what should I check?

Use the right resistor values and check the chips are 74HC.