Fault finder: Colour identifier for colour-blind users

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always the same colour: what should I check?

Recalibrate on white and check the distance.

Wrong names: what should I check?

Update the reference table with your own samples.

No voice: what should I check?

Check the SD card format and the file names.

Reads too dark: what should I check?

Move closer and make sure the LED is on.