Fault finder: Monsoon clothes drying rack fan

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Fan always on: what should I check?

The MOSFET gate pull-down is missing or the sensors disagree. Compare them in open air.

Fan never starts: what should I check?

Check the I2C addresses and the 12 V supply.

Display blank: what should I check?

Check I2C wiring.

Nano resets when the fan starts: what should I check?

Add a 470 µF capacitor on 12 V near the fan.