Fault finder: Balcony door child safety alarm

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No chime: what should I check?

Check the buzzer is a passive type and the reed polarity. The door open should read HIGH.

Chimes with the door closed: what should I check?

The magnet is too far from the reed switch.

Never sleeps: what should I check?

The pin change interrupt is not set for the right pin or the switch is bouncing.

Batteries die fast: what should I check?

The Nano's board draws current. Use a bare chip for the long-life version.