Fault finder: Schmitt trigger debounce and oscillator
10 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing happens: what should I check?
Check power on pins 14 and 7.
Erratic behaviour: what should I check?
Check the unused gate inputs are on ground.
LED A always on: what should I check?
Check the pull-up and the button wiring.
No oscillation: what should I check?
Check the feedback resistor and the capacitor.
LEDs very dim: what should I check?
Normal with CMOS outputs and 4.7 kilohm.
