Fault finder: Fruit touch piano
5 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
MPR121 not found: what should I check?
Check I2C wiring and its supply voltage.
Keys trigger by themselves: what should I check?
Raise the touch threshold or move the clips apart.
Some keys do not react: what should I check?
Lower the thresholds or touch more firmly.
Notes are scratchy: what should I check?
A passive buzzer is harsh. Try a small speaker with a 100 Ω resistor.
