Fault finder: Caesar cipher toy
13 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 13 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 13
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Blank screen: what should I check?
Check the OLED wires and try address 0x3D.
Garbled serial text: what should I check?
Set the monitor to 9600 baud.
Shift jumps about: what should I check?
Check the pot wiper goes to A0.
No clicks: what should I check?
Check you have a passive buzzer on D8.
Lowercase not shown as typed: what should I check?
The sketch changes everything to capitals.
