Fault finder: Busy light for video calls

9 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

A light never comes on: what should I check?

Check the long leg is towards the resistor and the pin.

Both lights stay off: what should I check?

Check the GND wires and that the program is running.

Button needs several presses: what should I check?

Check the button wires are firm.

Dim is too dim: what should I check?

Raise the second number in LEVELS.

Nothing after unplugging: what should I check?

Save the program as main.py on the Pico.