Fault finder: Bluetooth serial terminal control

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Cannot see HC-05: what should I check?

Power the module properly. A slowly blinking LED means connected, fast blinking means waiting.

Garbled text: what should I check?

Baud rate mismatch. Use 9600 on both sides.

Phone cannot pair: what should I check?

Use the PIN 1234. iPhones cannot use Bluetooth Classic.

Replies missing: what should I check?

Terminal app is not adding a newline. Enable newline in its settings.