Fault finder: Bluetooth RC car
7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
The app connects but nothing moves: what should I check?
Open the serial monitor. If letters arrive, check the motor wiring. If nothing arrives, check HC-05 TXD goes to D2.
Upload fails: what should I check?
The HC-05 on D0/D1 would block uploads. Here it uses D2/D3, so check the board and port settings.
The car drifts to one side: what should I check?
Motors differ. Lower the speed of the faster side in drive(), for example by 10 to 20.
It turns the wrong way: what should I check?
Swap the motor wires on that side.
