Fault finder: Blue Pill clock with a DS3231

11 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank screen: what should I check?

Check the OLED address and the 3.3 V supply.

Stuck at start: what should I check?

Check SDA and SCL on PB7 and PB6 and the module address 0x68.

Time resets at power loss: what should I check?

Check the coin cell and its polarity.

Time is wrong: what should I check?

Press the button to set it, or re-upload to reload the compile time.

Upload fails: what should I check?

Check the ST-Link wires and boot jumpers.