Fault finder: Blue Pill reaction timer

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing in the monitor: what should I check?

Check USB support is CDC and the port.

LED never lights: what should I check?

Check polarity and PA1.

Times are very short: what should I check?

Check the button is not bouncing, and wiring to PA0.

Same waits every power-up: what should I check?

Leave PA2 unconnected for the seed.

Upload fails: what should I check?

Check the ST-Link wires and boot jumpers.