Fault finder: Blue Pill self-levelling servo platform

11 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Platform tilts the wrong way: what should I check?

Flip the sign in the angle line.

Servo twitches: what should I check?

Increase the smoothing factor or add a capacitor across the servo supply.

No reading: what should I check?

Check SDA and SCL on PB7 and PB6 and the address 0x68.

Board resets: what should I check?

Power the servo from its own supply.

Upload fails: what should I check?

Check the ST-Link wires and boot jumpers.