Fault finder: Blue Pill melody player

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check the buzzer is passive and wired to PB8.

Notes run together: what should I check?

Reduce the sounding fraction in the play function.

Out of tune: what should I check?

Check the frequency numbers in the table.

Long press not recognised: what should I check?

Hold for a full second.

Upload fails: what should I check?

Check the ST-Link wires and boot jumpers.