Fault finder: BLE sensor with a custom GATT service
11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Not visible: what should I check?
Check Bluetooth is on and the device name is advertised.
Value looks odd: what should I check?
Remember it is an int16 in hundredths of a degree.
No notifications: what should I check?
Enable notifications on the characteristic in the app.
Cannot reconnect: what should I check?
Call startAdvertising in the disconnect callback.
