Fault finder: Room presence with BLE beacons
5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Winner flips back and forth: what should I check?
Smooth more and add a margin.
Nothing seen: what should I check?
Check the tag name and that the tag is advertising.
No MQTT: what should I check?
Check the broker address and Wi-Fi.
