Fault finder: Black Pill sun-seeking pointer

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Turns away from the light: what should I check?

Set DIR to -1.

Hunts back and forth: what should I check?

Increase DEAD_BAND.

Does not move: what should I check?

Check both dividers and the servo power.

Servo twitches: what should I check?

Use a separate 5 V supply and common ground.

Upload fails: what should I check?

Check the ST-Link wires and the board settings.