Fault finder: Black Pill capacitive touch keypad
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Characters appear on their own: what should I check?
Keep your hands away from the pads at start-up, and shorten the wires.
Nothing happens: what should I check?
Check the sensor address is 0x5A and the I2C wires are on PB7 and PB6.
Hard to trigger: what should I check?
Lower the touch threshold, for example 8 instead of 12.
Several pads fire at once: what should I check?
Space the pads further apart and keep wires apart.
Display blank: what should I check?
Check the I2C address 0x3C and the 3.3 V power.
