Fault finder: Black Pill parking assist beeper

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always silent: what should I check?

Check 5 V on the sensor and the echo divider.

Always steady: what should I check?

Check the echo wire is not shorted to 3.3 V or 5 V.

Erratic beeps: what should I check?

Use a flat, hard target and keep wires short.

No sound: what should I check?

Check the buzzer is passive and wired to PB8.

Board damaged risk: what should I check?

Never feed the echo straight into the pin, always divide it.