Fault finder: Birthday countdown display
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Prints No RTC found: what should I check?
Check the clock's SDA and SCL wires.
Wrong date: what should I check?
Re-upload to set the clock, or fit a new coin cell.
Display blank: what should I check?
Check CLK on D5 and DIO on D6.
Tune plays every loop: what should I check?
Check the clock keeps the right date.
Buttons do nothing: what should I check?
Check each goes to its pin and GND.
