Fault finder: Binary counter from flip-flops
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Count jumps by more than one: what should I check?
The button is bouncing. Check the 100 nF, 10 kΩ and Schmitt trigger.
Random start: what should I check?
Normal at power up. Press reset.
One bit never changes: what should I check?
The D to /Q wire or the clock link is missing at that stage.
All LEDs stay on: what should I check?
CLR is stuck low. Check the pull-up on the reset line.
