Fault finder: Bike tail light with brake flash
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Flashes on every bump: what should I check?
Raise BRAKE or smooth the reading more.
Never flashes: what should I check?
Wrong axis or sign. Print the values while braking.
Always on at noon: what should I check?
Adjust DARK or check the LDR divider.
Board resets: what should I check?
Check the MT3608 is at 5 V and the battery is charged.
