Fault finder: Magnifier ring light
10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Random colours: what should I check?
Common ground or data resistor missing.
Flicker at full brightness: what should I check?
Adapter is too small or the capacitor is missing.
No light: what should I check?
Check DIN is the input pad on the ring.
Colour looks off: what should I check?
Edit the three colour triplets to taste.
