Fault finder: Beehive weight and temperature monitor

7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Weight drifts: what should I check?

Shade the cells and allow warm-up.

One corner reads backwards: what should I check?

Swap that cell's red and black.

No LoRa packets: what should I check?

Check the band, antenna and wiring.

Reboots on transmit: what should I check?

The boost module needs a bigger capacitor.